Dollar Store Cork Board

So cute and lovely, no? The original Dollar Tree cork board was nice - it just had a medium oak color frame.

First thing I did was to spray paint. On this frame, unlike most I've painted, the back didn't easily come off. So to keep from painting the cork I slipped pages in between the frame and the cork all around the frame. Here's one piece of paper to show what I mean...

The cork on this board is super thin (what do you expect for a buck!) so I am thinking about buying a roll of cork board and cutting out a rectangle of it to glue to the back side of this frame. But that's for another day!

Now on to the pushpins!

I bought a pack of pushpins (again at the dollar store) and pulled off the pin. It's the dark portion in the pics below. It was held on with a dab of glue and was SUPER easy to remove.

I could have hot glued some fabric around the existing cover (pink in the pictures) but I didn't want to have a sticky mess so I bought a pack of 4 button covers at WalMart - I think they cost $1.22.

I took the back of the button and pounded down the sewable metal loop so I could stick the pin on.

Cut a piece of your desired fabric and place it in the rubbery portion of the button maker.

The directions say to cut the fabric at least 2x the diameter of the button. Don't be afraid to cut it too big - you can trim it later! (And it will look very silly and require some craftiness to salvage your button if you trim too much now - ask me how I know!)

 Then place the button cover on top of the fabric.

Use the pusher and push the cover down into the hole.

Tuck in the fabric (here is where you can trim a little bit of the fabric if you like - but not too much!) and place the button back on the top.

Next use the pusher and push the button together.

And out it comes!

Place glue on the button and the tack on the glue.

  

And you're done!